dmesg - running under unity
random: get_random_bytes called from start_kernel+0x42/0x4e1 with crng_init=0
Linux version 4.13.2-041302-generic (kernel@tangerine) (gcc version 7.2.0 (Ubuntu 7.2.0-3ubuntu1)) #201709132057 SMP Thu Sep 14 00:59:32 UTC 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000009c6fbfff] usable
BIOS-e820: [mem 0x000000009c6fc000-0x000000009d19bfff] reserved
BIOS-e820: [mem 0x000000009d19c000-0x000000009d1e3fff] usable
BIOS-e820: [mem 0x000000009d1e4000-0x000000009d29efff] ACPI NVS
BIOS-e820: [mem 0x000000009d29f000-0x000000009e2d7fff] reserved
BIOS-e820: [mem 0x000000009e2d8000-0x000000009e323fff] type 20
BIOS-e820: [mem 0x000000009e324000-0x000000009e324fff] usable
BIOS-e820: [mem 0x000000009e325000-0x000000009e32cfff] ACPI NVS
BIOS-e820: [mem 0x000000009e32d000-0x000000009e482fff] usable
BIOS-e820: [mem 0x000000009e483000-0x000000009e93afff] reserved
BIOS-e820: [mem 0x000000009e93b000-0x000000009e977fff] usable
BIOS-e820: [mem 0x000000009e978000-0x000000009efe8fff] reserved
BIOS-e820: [mem 0x000000009efe9000-0x000000009effffff] usable
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb00fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ESRT=0x9e2d6c18 ACPI=0x9d268000 ACPI 2.0=0x9d268000 SMBIOS=0xf04c0 MPS=0xfd4a0
random: fast init done
SMBIOS 2.8 present.
DMI: CompuLab fitlet/fitlet, BIOS SBCFLT_0.08.04 06/27/2015
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CEFFF write-protect
CF000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFE0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd730-0x000fd73f] mapped at [ffff9f36000fd730]
esrt: Reserving ESRT space from 0x000000009e2d6c18 to 0x000000009e2d6c50.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9f3600098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x1a6323000, 0x1a6323fff] PGTABLE
BRK [0x1a6324000, 0x1a6324fff] PGTABLE
BRK [0x1a6325000, 0x1a6325fff] PGTABLE
BRK [0x1a6326000, 0x1a6326fff] PGTABLE
BRK [0x1a6327000, 0x1a6327fff] PGTABLE
BRK [0x1a6328000, 0x1a6328fff] PGTABLE
BRK [0x1a6329000, 0x1a6329fff] PGTABLE
BRK [0x1a632a000, 0x1a632afff] PGTABLE
BRK [0x1a632b000, 0x1a632bfff] PGTABLE
BRK [0x1a632c000, 0x1a632cfff] PGTABLE
BRK [0x1a632d000, 0x1a632dfff] PGTABLE
BRK [0x1a632e000, 0x1a632efff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x32e1f000-0x35706fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009D268000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000009D268098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000009D26DD38 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170531/tbfadt-658)
ACPI: DSDT 0x000000009D2681E8 005B4A (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x000000009D28DE80 000040
ACPI: APIC 0x000000009D26DE48 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000009D26DEC8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000009D26DF10 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000009D26DFB0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: ASF! 0x000000009D26DFF0 0000D6 (v32 AMD SB700ASF 00000001 TFSM 000F4240)
ACPI: HPET 0x000000009D26E0C8 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: WDRT 0x000000009D26E100 000047 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: IVRS 0x000000009D26E148 000078 (v02 AMD AGESA 00000001 AMD 00000000)
ACPI: BGRT 0x000000009D26E1C0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000009D26E1F8 000624 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 0x000000009D26E820 00489D (v02 AMD AGESA 00000002 MSFT 04000000)
ACPI: SSDT 0x000000009D2730C0 0006CA (v01 AMD CPMADPS4 00000001 INTL 20051117)
ACPI: SSDT 0x000000009D273790 000474 (v01 AMD CPMXPRES 00000001 INTL 20051117)
ACPI: SSDT 0x000000009D273C08 001207 (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: SSDT 0x000000009D274E10 001457 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 0x000000009D276268 00008F (v01 AMD CPMDFMOT 00000001 INTL 20051117)
ACPI: SSDT 0x000000009D2762F8 001087 (v01 AMD CPMZPODD 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
NODE_DATA(0) allocated [mem 0x23efd5000-0x23effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000009c6fbfff]
node 0: [mem 0x000000009d19c000-0x000000009d1e3fff]
node 0: [mem 0x000000009e324000-0x000000009e324fff]
node 0: [mem 0x000000009e32d000-0x000000009e482fff]
node 0: [mem 0x000000009e93b000-0x000000009e977fff]
node 0: [mem 0x000000009efe9000-0x000000009effffff]
node 0: [mem 0x0000000100000000-0x000000023effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
On node 0 totalpages: 1947790
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 9956 pages used for memmap
DMA32 zone: 637167 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1306624 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9c6fc000-0x9d19bfff]
PM: Registered nosave memory: [mem 0x9d1e4000-0x9d29efff]
PM: Registered nosave memory: [mem 0x9d29f000-0x9e2d7fff]
PM: Registered nosave memory: [mem 0x9e2d8000-0x9e323fff]
PM: Registered nosave memory: [mem 0x9e325000-0x9e32cfff]
PM: Registered nosave memory: [mem 0x9e483000-0x9e93afff]
PM: Registered nosave memory: [mem 0x9e978000-0x9efe8fff]
PM: Registered nosave memory: [mem 0x9f000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb00fff]
PM: Registered nosave memory: [mem 0xfeb01000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x9f000000-0xfeafffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff9f383ec00000 s119704 r8192 d31848 u524288
pcpu-alloc: s119704 r8192 d31848 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1917329
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7342220K/7791160K available (9246K kernel code, 2477K rwdata, 4048K rodata, 2320K init, 2388K bss, 448940K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 37581 entries in 147 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1197.710 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2395.42 BogoMIPS (lpj=4790840)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 9 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10 Micro-6700T APU+AMD Radeon R6 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (9581.32 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x9d1e4000-0x9d29efff] (765952 bytes)
PM: Registering ACPI NVS region [mem 0x9e325000-0x9e32cfff] (32768 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:05:52, date: 09/16/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
pci 0000:00:00.2: [1022:1567] type 00 class 0x080600
pci 0000:00:01.0: [1002:9855] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfea64000-0xfea67fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xd0800000-0xd081ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xfe600000-0xfe6fffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xfea70000-0xfea70fff]
pci 0000:00:08.0: reg 0x24: [mem 0xfea6a000-0xfea6bfff]
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfea68000-0xfea69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfea6f000-0xfea6f3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xfea6e000-0xfea6e0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.0: reg 0x10: [mem 0xfea6d000-0xfea6d0ff]
pci 0000:00:13.0: supports D1 D2
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xfea6c000-0xfea6c0ff 64bit]
pci 0000:00:14.7: PME# supported from D3cold
pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
pci 0000:01:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xfe900000-0xfe901fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:02:00.0: [8086:1539] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfe800000-0xfe81ffff]
pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:02:00.0: reg 0x1c: [mem 0xfe820000-0xfe823fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: PCI bridge to [bus 02]
pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
pci 0000:00:02.4: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:03:00.0: [8086:1539] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfe700000-0xfe71ffff]
pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xfe720000-0xfe723fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.5: PCI bridge to [bus 03]
pci 0000:00:02.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.5: bridge window [mem 0xfe700000-0xfe7fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: Enabled 4 GPEs in block 00 to 1F
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x9c6fc000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d1e4000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9e325000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9e483000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9e978000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0680-0x068f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 3]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x040b] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c51] has been reserved
system 00:08: [io 0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cd1] has been reserved
system 00:08: [io 0x0cd2-0x0cd3] has been reserved
system 00:08: [io 0x0cd4-0x0cd5] has been reserved
system 00:08: [io 0x0cd6-0x0cd7] has been reserved
system 00:08: [io 0x0cd8-0x0cdf] has been reserved
system 00:08: [io 0x0800-0x089f] has been reserved
system 00:08: [io 0x0b20-0x0b3f] has been reserved
system 00:08: [io 0x0900-0x090f] has been reserved
system 00:08: [io 0x0910-0x091f] has been reserved
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:02.4: PCI bridge to [bus 02]
pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
pci 0000:00:02.4: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:02.5: PCI bridge to [bus 03]
pci 0000:00:02.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.5: bridge window [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfed3ffff window]
pci_bus 0000:00: resource 11 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:12.0: PME# does not work under D3, disabling it
pci 0000:00:13.0: PME# does not work under D3, disabling it
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 41888K
AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:01.0 to group 1
iommu: Using direct mapping for device 0000:00:01.0
iommu: Adding device 0000:00:01.1 to group 1
iommu: Adding device 0000:00:02.0 to group 2
iommu: Adding device 0000:00:02.2 to group 2
iommu: Adding device 0000:00:02.4 to group 2
iommu: Adding device 0000:00:02.5 to group 2
iommu: Adding device 0000:00:08.0 to group 3
iommu: Adding device 0000:00:10.0 to group 4
iommu: Adding device 0000:00:11.0 to group 5
iommu: Adding device 0000:00:12.0 to group 6
iommu: Adding device 0000:00:13.0 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Adding device 0000:00:14.2 to group 8
iommu: Adding device 0000:00:14.3 to group 8
iommu: Adding device 0000:00:14.7 to group 8
iommu: Adding device 0000:00:18.0 to group 9
iommu: Adding device 0000:00:18.1 to group 9
iommu: Adding device 0000:00:18.2 to group 9
iommu: Adding device 0000:00:18.3 to group 9
iommu: Adding device 0000:00:18.4 to group 9
iommu: Adding device 0000:00:18.5 to group 9
iommu: Adding device 0000:01:00.0 to group 2
iommu: Adding device 0000:02:00.0 to group 2
iommu: Adding device 0000:03:00.0 to group 2
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0x800290ad2):
PPR GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1505577952.483:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.2: Signaling PME with IRQ 26
pcieport 0000:00:02.4: Signaling PME with IRQ 28
pcieport 0000:00:02.5: Signaling PME with IRQ 30
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xfea6e000
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.2-041302-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:13.0: EHCI Host Controller
ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.0: debug port 2
ehci-pci 0000:00:13.0: irq 18, io mem 0xfea6d000
ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.2-041302-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.2-041302-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.2-041302-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:10.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x07030105
microcode: CPU1: patch_level=0x07030105
microcode: CPU2: patch_level=0x07030105
microcode: CPU3: patch_level=0x07030105
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1586120344, 0)->(1760218986, -174098642)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8e96f218a2928f5b355c008e5575d43ef4a7b3ee'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 1:431:85
rtc_cmos 00:06: setting system clock to 2017-09-16 16:05:53 UTC (1505577953)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2320K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 980K
Freeing unused kernel memory: 48K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
ahci 0000:00:11.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xfea6f000 port 0xfea6f100 irq 37
ata2: SATA max UDMA/133 abar m1024@0xfea6f000 port 0xfea6f180 irq 38
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (MULLINS 0x1002:0x9855 0x1002:0x0123 0x02).
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: AMD
radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 3824380 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading mullins Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] Found UVD firmware Version: 1.64 Family ID: 9
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff9f382cfdbc00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff9f382cfdbc04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff9f382cfdbc08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff9f382cfdbc0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff9f382cfdbc10
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffaaac42038d30
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff9f382cfdbc18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff9f382cfdbc1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 4 usecs
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
usb 3-2: new full-speed USB device number 2 using xhci_hcd
pps pps0: new PPS source ptp0
igb 0000:02:00.0: added PHC on eth0
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:01:c0:18:aa:06
igb 0000:02:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[drm] ring test on 6 succeeded in 14 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
usb 1-1: New USB device found, idVendor=0438, idProduct=7900
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=0438, idProduct=7900
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
ata1: SATA link down (SStatus 0 SControl 300)
usb 3-2: New USB device found, idVendor=046d, idProduct=c534
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Receiver
usb 3-2: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb3/3-2/3-2:1.0/0003:046D:C534.0001/input/input3
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb3/3-2/3-2:1.1/0003:046D:C534.0002/input/input4
pps pps1: new PPS source ptp1
igb 0000:03:00.0: added PHC on eth1
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:01:c0:18:aa:07
igb 0000:03:00.0: eth1: PBA No: FFFFFF-0FF
igb 0000:03:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:03:00.0 enp3s0: renamed from eth1
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: KINGSTON SMS200S3120G, 603ABBF0, max UDMA/133
ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
igb 0000:02:00.0 enp2s0: renamed from eth0
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA KINGSTON SMS200S BBF0 PQ: 0 ANSI: 5
hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-2/input1
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5
sd 1:0:0:0: [sda] Attached SCSI removable disk
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=8087, idProduct=07dc
usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
tsc: Refined TSC clocksource calibration: 1197.753 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1143d10de76, max_idle_ns: 440795241626 ns
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
clocksource: Switched to clocksource tsc
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A-2
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xC0722000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[drm] amdgpu kernel modesetting enabled.
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Created slice System Slice.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
systemd-journald[244]: Received request to flush runtime journal from PID 1
Adding 2032744k swap on /swapfile. Priority:-1 extents:6 across:2196584k SSFS
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ccp 0000:00:08.0: 4 command queues available
ccp 0000:00:08.0: enabled
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
iwlwifi 0000:01:00.0: loaded firmware version 17.459231.0 op_mode iwlmvm
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
snd_hda_codec_realtek hdaudioC1D0: ALC886: SKU not ready 0x00000100
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC886: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
snd_hda_codec_realtek hdaudioC1D0: CD=0x1c
iwlwifi 0000:01:00.0: base HW address: f8:16:54:87:5d:7f
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370710018002030d56
Bluetooth: hci0: Intel device is already patched. patch num: 56
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
input: HD-Audio Generic SPDIF as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
audit: type=1400 audit(1505577957.167:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=653 comm="apparmor_parser"
audit: type=1400 audit(1505577957.171:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=654 comm="apparmor_parser"
audit: type=1400 audit(1505577957.171:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=657 comm="apparmor_parser"
audit: type=1400 audit(1505577957.171:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=657 comm="apparmor_parser"
audit: type=1400 audit(1505577957.171:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=657 comm="apparmor_parser"
audit: type=1400 audit(1505577957.171:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=657 comm="apparmor_parser"
audit: type=1400 audit(1505577957.174:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=660 comm="apparmor_parser"
audit: type=1400 audit(1505577957.179:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=656 comm="apparmor_parser"
audit: type=1400 audit(1505577957.179:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=656 comm="apparmor_parser"
iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
igb 0000:03:00.0 enp3s0: igb: enp3s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
random: crng init done
perf: interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 79750